Armlock 1354 - Mini Electro-Shearmagnet

Application

The Adams Rite Armlock® 1354 is a mini Electro-Shearmagnet to facilitate remote access where minimal intrusion into the environment is required.

The product caters for single action internal doors or external doors where a form of cover is situated above the doorway to prevent direct rain penetration.

Specification

  • Compact slim line size - 30mm
  • Nominal 1500kg shear holding force
  • Adjustable locking time 1-30 secs
  • Suitable for door gaps up to 8mm
  • Supplied with 3m cable
  • Non-handed 
  • Guarantee 1 year
  • CE Marked to EMC Directive
  • Mortice or surface versions
  • Can be fitted into the head or vertical locking stile
  • Suitable for aluminium, timber, steel and glass doors
  • Suitable for use on aluminium, timber and steel doors

 

Finish

RiteKey Keypad ~ Push-to-Exit Button ~ Power Supply Unit Adams Rite

 

 

 

 

 

 

 

 

Standards

Magnet Dimensions (excluding shear pins):

Mortice magnet: 30mm x 164mm x 25mm. Surface magnet: 38mm x 200mm x 38mm.

Adjustable Armature: Mortice: 30mm x 164mm x 35mm.
Surface: 38mm x 200mm x 38mm.
Magnet Material: Electroless nickel plated steel in aluminium chassis.
Finish: Surface mounted housing finishes: Standard: Brushed silver, gold or bronze anodised on request.
Nominal Holding Force: 1500kg (assuming correct installation/alignment).
Supply Voltage: Dual, 12 or 24vDC.
Nominal Current Draw: Pull in - 1.5A @ 12vDC, 1.5A @ 24vDC. Holding - 0.5A @ 12vDC, 0.4A @ 24vDC.
Locking Gaps: Distance between armature face and magnet face: 12vDC: Horizontal/vertical application - 4mm max. 24vDC: Horizontal/vertical application - 5mm max.
Locking Tolerance: Lateral - ± 2mm. Longitudinal - ± 5mm.
Door Gap (sensor range): Maximum 8mm
Locking Time: Factory set at 1-2 seconds, adjustable up to 30 secs.
Monitoring: Precise anti-tamper monitoring of lock status using "hall effect" switch. Volt free changeover contacts rated @ 24vDC 1A for remote monitoring
Door Position Contacts: Built-in door position switch. Note that an independent door position switch must be fitted in steel door applications (order 1354-0600 separately).
Retry Facility: Failure to lock due to slight misalignment will result in the lock automatically retrying, up to a further 10 times, if required.
Handing: Non-handed
Cable Length: 3m
Ambient Temperature: Operating -20°C to +40°C. It is essential to use a fully rectified and regulated PSU with the 1354.
Note: To achieve immediate release, it is important that the release switch breaks the circuit on the positive supply to the magnet.